Smooth, unicolour conductive epoxy floor covering with polyuretane ESD roller coating system Sikafloor® MultiDur ES-43 ESD
Smooth, unicolour conductive epoxy floor covering with polyuretane ESD roller coating system Sikafloor® MultiDur ES-43 ESD
Sika Finland Oy Ab
Smooth, unicolour conductive epoxy floor covering with polyuretane ESD roller coating system Sikafloor® MultiDur ES-43 ESD
The Sikafloor® MultiDur ES-43 ESD system is a seamless, smooth, low VOC, ESD epoxy floor covering. It consist out of the two part, self-smoothing, conductive epoxy coating Sikafloor®-262 AS N and the two part, water dispersed, coloured ESD polyurethane roller coating Sikafloor®-305 W ESD.
Uses
Sikafloor® MultiDur ES-43 ESD may only be used by experienced professionals.
It is used as:
Dissipative coloured indoor system for electrostatic protected areas (EPA).
<liParticularly suitable for areas with requirements for the lowest electrostatic charge (low BVG (Body Voltage Generation)) and dissipative surface
ETypical applications include clean rooms in the electronics industry, microbiology/microchemistry sectors, production plants in the automobile industry etc.
Characteristics / Advantages
Body voltage generation < 20 V
Conforms to the requirements of ANSI/ESD S20.20 and IEC 61340-5-1
Fulfils ESD-requirements at > 12 % RH/+23°C*
Good UV resistance, non-yellowing
Very low VOC emissions
Water based top coat
Easy to apply & easy to clean
Easy to refurbish, can be overcoated directly with itself
